A basic disk for installing the OS is provided, but you can create as many additional disks as you need. The server can be used on a monthly or hourly basis. If you use less than one month of storage, the usage fee is calculated based on days used. A server with one vCPU and 2GB memory can be used only with Linux OS. Only one micro server is provided for each account.

• Pricing will be implemented based on Korea Standard Time (UTC+9).

Pricing Information for Server Service Stoppage

• When stopping a server service, only the fee on the basic disk provided for the installation of OS on some server types will be charged.
• Fees for other resources connected to the server, such as public IP, load balancer, additional disks and Security Monitoring will be charged regardless of server stoppage.
  Please be sure to return the resources that are not used to avoid unnecessary billing problems.
  (Fees on OS and MSSQL will not be charged. However, Baremetal Servers will be charged the same even if they are stopped.)
• Servers with discounted rates at the time of server stoppage may not stop the server for more than 90 days at a time or for more than a cumulative 180 days within 12 months. Servers that have exceeded the possible period for stopping the server will be withdrawn after notifying the customer. At this time, the customer data stored in the server will be deleted after being backed up and stored by the company for 30 days and the customer can request to reuse the server or recover data only within the storage period.

Price List for Server Service Stoppage

Classification	Generation	Target Server Type
Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Compact Server, Standard Server, CPU Intensive Server
	Classic 2nd (g2)	2nd generation Server(Standard-g2, High CPU-g2, High Memory-g2)
	VPC	Standard-g2 Server, High CPU-g2 Server, High Memory-g2 Server
Not Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Micro Server, High Memory Server, GPU Server, Baremetal Server
	Classic 2nd (g2)	-
	VPC	GPU Server, Baremetal Server

Provides a standard server, Standard/High-CPU/High-Memory type server. Network traffic from the server is billed for total usage by summing it up with the server. Classic/VPC second-generation servers provide a primary disk for operating system installation; VPC third-generation servers do not provide a primary disk. Regardless of the server generation, you can create additional disks as many times as you want. You can use the server on a monthly or hourly basis, and in the case of monthly charges, if you use it for less than a month, it will be calculated and charged daily.

• Pricing will be implemented based on Korea Standard Time (UTC+9).

Pricing Information for Server Service Stoppage

• When stopping a server service, only the fee on the basic disk provided for the installation of OS on some server types will be charged.
• Fees for other resources connected to the server, such as public IP, load balancer, additional disks and Security Monitoring will be charged regardless of server stoppage.
  Please be sure to return the resources that are not used to avoid unnecessary billing problems.
  (Fees on OS and MSSQL will not be charged. However, Baremetal Servers will be charged the same even if they are stopped.)
• Servers with discounted rates at the time of server stoppage may not stop the server for more than 90 days at a time or for more than a cumulative 180 days within 12 months. Servers that have exceeded the possible period for stopping the server will be withdrawn after notifying the customer. At this time, the customer data stored in the server will be deleted after being backed up and stored by the company for 30 days and the customer can request to reuse the server or recover data only within the storage period.

Price List for Server Service Stoppage

Classification	Generation	Target Server Type
Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Compact Server, Standard Server, CPU Intensive Server
	Classic 2nd (g2)	2nd generation Server(Standard-g2, High CPU-g2, High Memory-g2)
	VPC	Standard-g2 Server, High CPU-g2 Server, High Memory-g2 Server, CPU Intensive-g2 Server
Not Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Micro Server, High Memory Server, GPU Server, Baremetal Server
	Classic 2nd (g2)	-
	VPC	GPU Server, Baremetal Server

• The basic disk for installing the OS is provided. You can create as many additional disks as supported by the OS (up to 2,000GB per disk).
• Servers can be used on an hourly or monthly basis. If you use less than one month of storage, the usage fee is calculated based on days used.

• Pricing will be implemented based on Korea Standard Time (UTC+9).

Pricing Information for Server Service Stoppage

• When stopping a server service, only the fee on the basic disk provided for the installation of OS on some server types will be charged.
• Fees for other resources connected to the server, such as public IP, load balancer, additional disks and Security Monitoring will be charged regardless of server stoppage.
  Please be sure to return the resources that are not used to avoid unnecessary billing problems.
  (Fees on OS and MSSQL will not be charged. However, Baremetal Servers will be charged the same even if they are stopped.)
• Servers with discounted rates at the time of server stoppage may not stop the server for more than 90 days at a time or for more than a cumulative 180 days within 12 months. Servers that have exceeded the possible period for stopping the server will be withdrawn after notifying the customer. At this time, the customer data stored in the server will be deleted after being backed up and stored by the company for 30 days and the customer can request to reuse the server or recover data only within the storage period.

Price List for Server Service Stoppage

Classification	Generation	Target Server Type
Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Compact Server, Standard Server, CPU Intensive Server
	Classic 2nd (g2)	2nd generation Server(Standard-g2, High CPU-g2, High Memory-g2)
	VPC	Standard-g2 Server, High CPU-g2 Server, High Memory-g2 Server, CPU Intensive-g2 Server
Not Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Micro Server, High Memory Server, GPU Server, Virtual Dedicated Server, Baremetal Server
	Classic 2nd (g2)	-
	VPC	GPU Server, Baremetal Server

• The disk is provided with an operating system installed.
• Servers can be used on an hourly basis.

Pricing Information for Server Service Stoppage

• When stopping a server service, only the fee on the basic disk provided for the installation of OS on some server types will be charged.
• Fees for other resources connected to the server, such as public IP, load balancer, additional disks and Security Monitoring will be charged regardless of server stoppage.
  Please be sure to return the resources that are not used to avoid unnecessary billing problems.
  (Fees on OS and MSSQL will not be charged. However, Baremetal Servers will be charged the same even if they are stopped.)
• Servers with discounted rates at the time of server stoppage may not stop the server for more than 90 days at a time or for more than a cumulative 180 days within 12 months. Servers that have exceeded the possible period for stopping the server will be withdrawn after notifying the customer. At this time, the customer data stored in the server will be deleted after being backed up and stored by the company for 30 days and the customer can request to reuse the server or recover data only within the storage period.

Price List for Server Service Stoppage

Classification	Generation	Target Server Type
Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Compact Server, Standard Server, CPU Intensive Server
	Classic 2nd (g2)	2nd generation Server(Standard-g2, High CPU-g2, High Memory-g2)
	VPC	Standard-g2 Server, High CPU-g2 Server, High Memory-g2 Server, CPU Intensive-g2 Server
Not Applicable for Discounts at Server Stoppage	Classic 1st (g1)	Micro Server, High Memory Server, GPU Server, Virtual Dedicated Server, Baremetal Server
	Classic 2nd (g2)	-
	VPC	GPU Server, Baremetal Server

• You can approximately estimate monthly charges with action execution times, allocated memory, and number of monthly execution.
• Cloud Functions can additionally use the related services provided by NAVER Cloud. When using related services, additional costs are incurred for each product. Please refer to the pricing plan for each product for more information regarding usage fees. (Among the related services, Cloud Log Analytics must be used.)
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Average execution time : 500 (millisecond) / Action Memory: 128 (MB) / Number of monthly requests: 5,000,000 (time)
= Monthly charges: total of KRW 800

Computing Usage

Average execution time : 500 (millisecond)
Action Memory: 128 (MB)
Number of monthly requests: 5,000,000 (time)

Total computing time (average execution time * number of monthly requests) : 2,500,000 (second)
Total computing time (total computing time * action memory / GB) : 312,500 (GB-sec)
Free tier (month): 400,000 (GB-sec)
Computing usage to be charged : 0

Execution request

Number of monthly requests: 5,000,000 times
Free tier (month): 1,000,000 (time)
Number of requests to be charged: 4,000,000 times

Calculation of Service Charges

Computing usage charges: KRW 0
Request usage charges: KRW 800

Average execution time : 500 (millisecond) / Action Memory: 256 (MB) / Number of monthly requests: 5,000,000 (time)
= Monthly Charges: Total of KRW 4,625

Computing Usage

Average execution time : 500 (millisecond)
Action Memory: 256 (MB)
Number of monthly requests: 5,000,000 (time)

Total computing time (average execution time * number of monthly requests) : 2,500,000 (second)
Total computing time (total computing time * action memory / GB): 625,000 (GB-second)
Free tier(month): 400,000 (GB-sec)
Computing usage to be charged: 225,000 (GB-sec)

Execution Request

Number of monthly requests: 5,000,000 (time)
Free tier (month): 1,000,000 (time)
Number of requests to be charged: 4,000,000 (time)

Calculation of Service Charges

Computing usage (Computing usage to be charged(GB-sec) * KRW 0.017) : KRW 3,825 (225,000 * 0.017)
Request usage charges: KRW 800

Data Storage Fee

[Example] When storing 800GB data in object storage for 20 days and storing 2 TB data for 10 days, the monthly average storage (GB per month) is as follows (based on 30 days per month and per hour of storage):

• Monthly storage = [800GB x (20 days x 24 hours) + 1024 GB x 2 x (10 days x 24 hours)]/720 hours = 1216GB/month
• Monthly data storage fee = 1216GB/month x KRW 28= KRW 34,048

Price of API Requests

The fees per Object Storage API request are as follows. (Usage-based fees / billing unit)

• PUT, COPY, POST or LIST request = 0.0045 KRW per call
• GET and all other requests = 0.0004 KRW per call
  [Pricing example]
• Example: For a month, if 15,000 calls of [PUT, COPY, POST or LIST request] were requested, the fee is 67.5 KRW.
• Example: For a month, if 35,000 calls of [GET and all other requests] were requested, the fee is 14 KRW.
• ※ In actual billing, the fees are rounded to the nearest 10 KRW and billed.

Network Transfer Fee

Fees are charged only for outbound traffic through the Internet. Internal network traffic with the NAVER CLOUD PLATFORM server, CDN+, and GCDN is free of charge.

You will only be charged for outbound traffic that connects through the internet

Can be used in a VPC environment.

Fees for traffics occurring in the private communication section between VPC and Object Storage are shown below.

My Server Images, Snapshot Charges

· Regardless of the disk type (HDD, SSD) of the source server, My Server Image or Snapshot charges are based on the HDD Block Storage fee.

· If you use 10GB of My Server Image or Snapshot for one month (30 days), the fee is 576 KRW(0.08 KRW x 24 hours x 30 days).

• The DBMS fee is charged on a monthly basis only.
• The MSSQL fee is the DBMS license fee. The server and OS (Windows) fees are charged separately.
  [Example] When using MSSQL on a server with 2 vCPUs: KRW 69,000 (server) + KRW 20,000 (Windows license) + KRW 290,000 (MSSQL license) = KRW 379,000/month

There is no base fee and users can create capacity volumes from 500GB to 10TB in size.

Prices Per Unit of NAS Volume

• The minimum capacity per volume is 500GB and can be increased by 100GB increments.
• Up to 500GB of NAS volume per month (30 day-based) will cost you KRW 36,000.
• Next 100GB of NAS volume per month (30 day-based) will additionally cost you KRW 7,200.
• SMS that are sent to notify about event occurrences are free at this time. In case of conversion to paid service in the future, we will notify you sufficiently in advance.

• The minimum capacity for backup service is 100GB. When the actual usage is 100GB or less, the 100GB fee is charged. If usage exceeds 100GB, the additional usage is charged per GB.
• [Example] If the backup service is applied on March 20 and the total usage in March is 20GB, the fee is KRW 30,000 for the price of the basic capacity of up to 100GB.
• [Example] If the backup data usage is 300GB, the fee is KRW 90,000 [ KRW 30,000 + KRW 300 * 200GB].
• If you apply for remote replication, the usage capacity will be double.
• The network traffic expenses generated when using the backup service is free.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

• If the zone holding period is less than 1 month, then the daily charge will be applied.
• The number of zones is calculated by calculating the monthly average of the period and quantity held.
  For instance, if 60 zones are held for an average of 20 days, 60 (pcs) x 20/30 (days) = 40 is calculated for a month so 25x550 + 15x110 = 13,750 + 1,650 = KRW 15,400 will be charged.
• The queries for all domains in hold are collected and charged monthly, based on the total.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

You are charged based on the average number of health check resources you use in a given month.
Example: If you use one internal health check resource for the first 15 days but do not perform health checks for the remaining 15 days of the month, you will be charged for 0.5 health checks.

The number of incoming queries in a given month is rounded up to the nearest million.
The fees are charged by adding the number of queries that occurred in all traffic profiles owned.

Service fee = Monthly transmission fee + monthly request fee
1) Monthly transmission fee = sum of each usage level fees for the total amount of CDN transmission per month
2) Monthly request fee = total number of CDN request per month

Guide to data collection for monthly service charges
- The sum of monthly transmission fee and monthly request fee from [the last day of the month before previous month – 3 days] to [the last day of the previous month – 4 days]
- [Example] May service charges breakdown = the sum of transmission fee and the request fee from March 28 to April 26

Pricing will be implemented based on Korea Standard Time (UTC+9).

SSL VPN Service Fee

- You can purchase one SSL VPN product for each VPC.
- Basic charges will be charged for each product used.
- If you use SSL VPN for less than one month, the usage fee will be calculated and charged per day.
- The usage fee is calculated based on the Korean Standard Time Zone (UTC+9).

[Pricing Example]

1. If you use ID 3 product on VPC1, the basic fee is 80,000 won/month + the external access ID fee is 40,000 won/month = 120,000 won/month.
2. If you use ID 3 for VPC1 and ID 5 for VPC2: Basic fare 80,000 won/month + External access ID fee 40,000 won/month + Basic fee 80,000 won/month + External access ID fee 70,000 won/month = 270,000 won/month

Network Transfer fee

Network traffic generated when connecting to a server via SSL VPN from the outside is included in the network traffic used by that server and charged.

• It is charged based on the number of inputted characters, and the number of characters is calculated by rounding up to 1,000,000 characters.
  (For example, KRW 20,000 is charged when you use 500,000 characters per month. KRW 40,000 is charged when you use 1,600,000 characters per month)
• The number of characters includes spaces and special characters.
• You are not charged separately for the language detection features in Text Translation API and Website Translation API.
• For Papago Website Translation API, all characters (including tags and code points) included in the document requested for translation are included in the number of characters.
  For example, <p>무엇을 도와드릴까요?</p> will be counted as 18 characters.
• The usage (characters) is calculated on a monthly basis, and the previous month's usage is carried over to the following month.
• The usage of each API product is separately calculated.
  For example, 500,000 characters of Papago Text Translation API a month used + 300,000 characters of Papago Language Detection API used a month + 900,000 characters of Papago Doc Translation API a month → A total of KRW 70,000 (= KRW 20,000 + KRW 20,000 + KRW 30,000) will be charged.

• The fees are charged based on the number of calls and the number of characters.
• The number of characters will be rounded up to the nearest 1,000,000.
  [Example] 20,000 KRW is charged when you use 500,000 characters per month. 40,000 KRW is charged when you use 1,600,000 characters per month.
• Image recognition and synthesis are charged separately based on the number of calls.
• Spaces and special characters are counted the same as letters. You are not charged separately for the language detection feature.
• The usage amount is calculated on a monthly basis, and the previous month's usage does not carry over to the following month.
• The usage amount of each API product is calculated separately.
  [Example] 100 calls and 500,000 characters used per month for Papago Image Translation (Text) + 10 calls and 400,000 characters used per month for Papago Image Translation (Image)
  → Total of 47,200 KRW (= 6,000 KRW + 20,000 KRW + 1,200 KRW + 20,000 KRW)

※ The usage volume is determined by the number of uses.
※ For more information on free usage and representative accounts, please refer to the FAQ. (Free Usage FAQ, Representative Account FAQ)

※ Image CAPTCHA and Audio CAPTCHA are on a same price plan.

※ Pricing will be implemented based on Korea Standard Time (UTC+9).

Private Subnet Fee

• If you use one unit of Private Subnet for one month (30 days) then the fee is KRW 20,160.

Private Subnet Peering Fee

The network fee charged for connecting to a private subnet via peering is as follows:

The global promotion fees are as follows: The actual fee may be different once the promotion is complete.

[Pricing plan information]

• You can select between Lite and Basic in consideration of the company's desired features.
• The billing unit is based on 1 person, and the amount excludes VAT.
• We provide the service through monthly or discounted annual plans.
• A 30-day free trial of the service is available when you request the service.
• The usage fee is calculated based on the Korean time zone (UTC+9).
• Shared storage refers to the storage used for attachments within WORKPLACE.

• When requesting subscription, a 30-day free trial is available only once at the beginning.
• When using paid plan, 1 TB of shared storage and 10 GB of user-specific individual storage are provided by default.
• Additional storage purchases can be requested after conversion to a paid plan, in increments of 10 GB.
• Additional services like online edit and electronic contract can be requested after switching to a paid plan.
• The minimum number of users is 3, and if the number of users on average is 3 or less, 15,000 KRW is charged as the minimum pricing. When it exceeds 3 users, 5,000 KRW per user is added to the usage fees.

Core features

[Charging example]

If 2 people have been using the WORKBOX service from June 1st to 15th, and 7 more users were added from the 16th along with purchasing 300 GB of additional storage, and the online editing service was also added for use from the 22nd

Pricing for users
WORKBOX: 15,000 KRW (minimum pricing for 3 or fewer people) * 15 days/30 days = 7500 KRW
WORKBOX: 35,000 KRW (5000 KRW * 7 people) * 15 days/30 days = 17,500 KRW

Pricing for additionally purchased storage
15,000 KRW (pricing for 300 GB per month) * 15 days/30 days = 7500 KRW

Pricing for additional services: online editing
1000 KRW (pricing per month) * 7 people * 9 days/30 days = 2100 KRW

Final pricing
25,000 KRW (users) + 7500 KRW (additionally purchased storage) + 2100 KRW (additional services: online editing) = 34,600 KRW

MAD: Monthly Active Device is the number of mobile devices that have activated App Safer during the month.

Additional fees will be charged for Cloud Log Analytics, which is mandatorily connected to App Safer. Please refer to the product rate plan for details.

Pricing Examples

Case 1: When an app to which App Safer has been applied is distributed to 10,000 mobile devices, and App Safer is executed in the app on 70 different mobile devices during the month.
→ 0 KRW (= 70 MAD x 0 KRW/MAD)

Case 2: When an app to which App Safer has been applied is distributed to 2,000,000 mobile devices, and App Safer is executed in the app on 1,500,000 different mobile devices during the month.
→ 3,549,300 KRW (= 100 MAD x 0 KRW/MAD + 299,900 MAD x 7 KRW/MAD + 700,000 MAD x 2 KRW/MAD + 500,000 MAD x 0.1 KRW/MAD)

Case 3: When there are 2 apps, to which App Safer has been applied, in 1,000 mobile devices, and each app has been run more than once on each device.
→ 12,600 KRW (= {(100 MAD x 0 KRW/MAD + 900 MAD x 7 KRW/MAD) + (100 MAD x 0 KRW/MAD + 900 MAD x 7 KRW/MAD)})

Case 4: When an app to which App Safer has been applied is executed 100 times on a single mobile device.
→ 0 KRW (= 1 MAD x 0 KRW/MAD)

Pricing will be implemented based on Korea Standard Time (UTC+9).

• You can select a product with guaranteed bandwidth of 10 Mbps, 20 Mbps, or 30 Mbps, and will be charged based on the selected product.
• The guaranteed bandwidth is for both-ways. (For instance, if you select 10 Mbps, inbound traffic of 10 Mbps and outbound traffic of 10 Mbps are guaranteed.)
• Make sure that you use the allocated guaranteed bandwidth. If exceeded, packet loss will occur.
• We recommend the use of Cisco products for your external IPsec VPN Gateway.

※ Effective Log Search & Analytics fees are charged by combining the log usage and API call fee.

• Pricing Example
  If you store 10GB worth of application logs for 20 days and then store 20GB for the remaining 10 days of the month, the monthly average of data stored (GB-month) is as follows:
  - Monthly average of data stored = [(10GB x 20 days) + (20GB x 10 days)]/30 days = 13.3 GB
  - Total storage fee of the month = 13.3GB/month x KRW 800 = KRW 10,640
  - We're planning to provide APIs to utilize Effective Log Search & Analytics logs in the future and the usage fee will be calculated based on the monthly accumulated number of API calls.

※ The data storage period is 30 days. After 30 days, the data is automatically deleted without prior notice.

• The price for Ncloud Single Sign-On depends on the type of service you sign up for.
  - NAVER Cloud login charges you for the number of times users are authenticated on all apps.
  - External IdP login charges you for the number of times users are authenticated through an external IdP.
• Ncloud Single Sign-On is offered free of charge, and we will give you at least 30 days' notice before any pricing changes.

Web Security Checker fees are charged based on the number of diagnoses.

* In case of diagnosing the same target within sixty days after the first diagnosis, you can diagnose the vulnerability up to two additional times without additional cost.

• Same target means the website with the same URL as the public IP of the initially scanned website.
• Once the valid period or number of available rediagnosis is exceeded, the fee will be calculated as a new diagnosis.

*In the following cases, you will not be charged and not be given security diagnostics.

• You will not be charged if:
• Web Security Checker fails to detect and diagnose vulnerabilities for its system fault.
• you ask to stop the diagnostic process during the scan.
• Customer Support Center quits the diagnostic process at your request during the scan.
• a normal access is not available to the website to be diagnosed.

Please note that all cases other than circumstances described above will be normally charged and you should check necessary issues, if any, prior to the process start.

Pricing will be implemented based on Korea Standard Time (UTC+9).

DB Servers

• When high availability support is selected, a total of two servers, active master DB and standby master DB, are created for redundancy.
• The slave DB is a replica that is created to distribute the read load of the database and is created one unit at a time.
• The default 50GB disk is for the OS and cannot be additionally extended or added. It is included in the usage fee.
• The data storage for storing the DB data is charged separately on an hourly rate depending on the usage amount.
• Cloud DB for the MySQL is a fully managed product and does not permit the access of user's OS. It only supports Linux OS.

[Example] (VPC) If you use the high availability DB server for a month, the DB server fee will be as follows: (Usage is calculated based on a 30 day month)

• DB server specifications: Standard (2 vCPU, 8 GB memory)
• DB server fee: KRW 253 (per hour) * 24 (1 day) * 30 days (1 month) * 2 (high availability on 2 units) = KRW 364,320

[Example] (Classic) If you use the high availability DB server for a month, the DB server fee will be as follows: (Usage is calculated based on a 30 day month)

• DB server specifications: Standard (2 vCPU, 4 GB memory)
• DB server fee: KRW 168 (per hour) * 24 (1 day) * 30 days (1 month) * 2 (high availability on 2 units) = KRW 241,920

Data Storage

• Data Storage is the storage for saving database data. It stores the entire data, such as tables, indexes, and log data.
• A standard 10GB storage is provided and automatically increases in 10GB increments, up to the maximum of 6000GB depending on the data storage amount.
• A notification is sent to the user at every 10 GB increment of usage.
• The pricing table according to data storage usage can be viewed from Pricing > Pricing plan by region > (Region) > Block Storage.

Backup Storage

• Backup storage is for backing up database data. It saves all table and index data automatically once a day.
• The backup data can be stored for a minimum of 1 day to a maximum of 30 days, and is charged on an hourly rate according to the usage amount.

Network transfer fee

• Network usage fee for outbound traffic is charged according to the pricing table.
• The pricing table according to network usage can be viewed from Pricing > Pricing plan by region > (Region) > Network.

License Fee by Product Type

• BYOL is not allowed as a general rule. Existing customers may contact the Tmax Soft/Data sales representatives for detailed information.
• A separate server fee will be incurred if a NAVER CLOUD PLATFORM server product is in use.
• Pricing plan of Tibero Standard Edition will be based on 8vCPU units starting May 1, 2020.
  Therefore, the same price will be incurred for all S/W usages within the range of 1vCPU – 8vCPU server specifications.

How to use the technical support service

※ The Cloud Log Analytics fees are charged by adding up the log collection fee and log storage fee according to the selected pricing plan (Standard, Premium).

• When using the Standard pricing plan, the maximum daily collectable log capacity is limited to 20 GB, and logs exceeding 20 GB are not collected.
• If you need to collect and store more logs, then select the Premium pricing plan.

Pricing examples

Standard pricing plan

When collecting 1 GB of logs per day, the log collection and storage fees are as follows.

• Log collection fee = 0 KRW
• Log storage fee = average monthly log usage - free usage * 800 KRW = [{(1 + 2 + 3 + ... + 29 + 30) / 30} - 1] * 800 = 11,600 KRW
• Monthly usage fee = log collection fee + log storage fee = 0 KRW + 11,600 KRW = 11,600 KRW

Premium pricing plan

When collecting 20 GB of logs per day, the log collection and storage fees are as follows.

• Log collection fee = log collection capacity * 500 KRW = 20 GB * 30 days * 500 KRW = 300,000 KRW
• Log storage fee = 0 KRW
• Monthly usage fee = log collection fee + log storage fee = 300,000 KRW + 0 KRW = 300,000 KRW

If 50 notifications were received via SMS while using 30 keyword notifications for a month, the usage fee is as follows.

• Keyword notification fee = (the number of keyword notifications set up - the number of keyword notifications included in the plan) * 500 KRW = (30-20) * 500 KRW = 5000 KRW
• SMS fee = the number of sent messages * 9 KRW = 50 messages * 9 KRW = 450 KRW

• Data storage period is 30 days. The data is automatically deleted after 30 days, and no prior notice is given.
• The log collection fee for the Standard pricing plan and the log storage fee for the Premium pricing plan are provided free of charge for a limited time. We will make an announcement one month before changing them to paid services.

Cloud Hadoop and Server Instance Price

It is a cost-effective service that allows users to pay as they go during the cluster cycle. Rates are available at a per-minute basis, with a minimum charge of 1 minute.

• The master node is created by default for high availability.
• The default 50GB disk is for the OS and cannot be additionally extended or added. It is included in the usage fee.
• Cloud Hadoop data storage fees will be separately charged for different storage types (e.g., Block Storage, Object Storage) based on time and storage size.

Data Storage Fee (Block Storage)

• Storage is used for storing Cloud Hadoop HDFS data.
• Minimum 100GB to 2,000GB is available in 10GB increments, and available in 4,000GB and 6,000GB.
• · The pricing table according to data storage usage can be viewed from Pricing > Pricing plan by region > (Region) > Block Storage.

Data Storage Fee (Object Storage)

• Use Object Storage to store large amounts of data.
• The Object Storage fee is calculated by combining the data storage fee, number of API requests, and network transfer fee.
• The pricing chart based on Object Storage usage can be viewed in Pricing > Pricing plan by region > (Region) > Object Storage.

Network transfer fee

• Network usage fee for outbound traffic is charged according to the pricing table.
• The pricing table according to network usage can be viewed from Pricing > Pricing plan by region > (Region) > Network.

• Usage of File Filter will be rounded up to the nearest 10,000 scans and the usage will not be carried forward to the following month.

Pricing Examples

Case 1) If 500,000 Hash Filter scans were used in a month: KRW 3,200,000 (= 300,000 scans x KRW 8/scan + 200,000 Scans x KRW 4/Scan)
Case 2) If 9,000 File Filter scans were used in a month: KRW 100,000 (= KRW 100,000/10,000 scans x 10,000 scans)
Case 3) If 10,000 File Filter scans were used in a month: KRW 100,000 (= KRW 100,000/10,000 scans x 10,000 scans)
Case 4) If 1,005,000 File Filter scans were used in a month: KRW 8,280,000 (= KRW 100,000/10,000 scans x 100,000 scans + KRW 80,000/10,000 scans x 910,000 scans)
Case 5) If 3,000 File Filter scans were used in October and 6,000 scans in November: October fee is KRW 100,000 and November fee is KRW 100,000.

App Security Checker is charged based on the number of diagnoses.

* In case of re-diagnosis of the same subject within 60 days of the first diagnosis, no additional charges will be billed up to two additional times.

• The same target means an app of which the name of first-diagnosed mobile app and the package name are the same.
• If you exceed the period or number of times you can re-diagnose, you will be charged for new diagnoses.

* In the cases below, you will not be charged and no vulnerability diagnosis report is provided.

• If diagnosis fails due to problems with the App Security Checker system, you will not be charged.
• If you cancel the diagnosis during the diagnosis wait, you will not be charged.
• If diagnosis stopped at Customer Support Center due to customer's request during the diagnosis, you will not be charged.

Except the cases mentioned above, your will be charged as usual. Please check the items you need to check before diagnosis.

Pricing will be implemented based on Korea Standard Time (UTC+9).

System Security Checker fees are charged depending on the number of diagnoses.

* In the case of WAS vulnerability diagnosis, if the same target is re-diagnosed within 30 days after the initial diagnosis, there is no additional charge up to one additional case.

• The same target means that the first diagnosed server (instance ID-based) and the WAS type are the same.
• If you exceed the period or number of times of re-diagnosis, you will be charged for new diagnosis.
• In the case of OS vulnerability diagnosis, a separate free re-diagnosis policy does not apply.

* The following cases are not charged and no vulnerability diagnosis report is provided.

• If diagnosis fails due to problems with the System Security Checker system, you will not be charged.
• If diagnosis stopped at Customer Support Center due to customer's request during the diagnosis, you will not be charged.

Except the cases mentioned above, your will be charged as usual. Please check the items you need to check before diagnosis.

Pricing will be implemented based on Korea Standard Time (UTC+9).

* API Gateway fees are charged by combining the API call fee, network transmission, and cache usage amount.
* If you designate the endpoint as NAVER CLOUD PLATFORM product, you may be charged for extra network service fee.

Pricing Example

If you make 5 million API calls, transmit 100GB of data, and use 10MB of cache every hour, the usage fee is as follows: (Usage is calculated on an hourly basis, for 30 days in a month)

• Total usage
  - API calls = 5 million - 1 million (basic) calls = 4 million calls
  - Data transmission = 100GB – 1GB (basic) = 99GB
  - Cache usage= 10MB * 24 hours* 30 days = 7200MB
  
  
• Pricing example
  - API call fee = 400 million calls * KRW 0.004
  - Data transmission fee = 99GB * KRW 100
  - Cache usage fee = 7200MB / 10 MB * KRW 0.5
  
  * Data transmission is calculated as follows: Data transmission = 3KB * No. of API calls
  * 10MB cache usage is allocated to each stage and 10MB per hour is metered for calculation.
• * Pricing will be implemented based on Korea Standard Time (UTC+9).

• [Service Fee = Monthly Usage Fee + Monthly Data Throughput Fee]
  - Usage Fee = Charged on an hourly rate per 1 NAT Gateway
  - Data Throughput Fee = Amount of data throughput transmitted via NAT Gateway
• [Pricing Example]
  After creating 2 NAT Gateways at 10 PM on 28, November,
  20GB was transmitted from Server A to external IP x via NAT Gateway,
  and 10GB was transmitted from Server B to external IP y via NAT Gateway.
  For this case, the NAT Gateway fee for November is KRW 7,400.
  (However, the outbound traffic to Internet transmitted from server to external IPs x and y will be charged as the server network fee.)
  - Usage Fee: 50hrs x KRW 56 x 2 Gateways = KRW 5,600
  - Data Throughput Fee: Since 30 GB of data was processed by NAT Gateway, 30 GB x KRW 60 = KRW 1,800
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Redis Server

• (VPC) Composed of at least 3 Shards. Shards can be set starting from 3, up to a maximum of 10, and each Shard can be set to have from 0 to a maximum of 4 Replicas.
• (Classic) If you do not use HA, then 1 Redis server is used. If you do use HA, 2 Master-Standby Redis servers are used.

* E.g., (VPC) If you use a Redis server with 3 Shards using one Replica each, the fee will be as follows: (Usage is calculated based on a 30-day month.)

• Redis server specifications: Standard (6.4 GB memory)
• Total usable memory: 19.2 GB
• DB server fees: 208 KRW (per hour) * 24 (1 day) * 30 days (one month) * 3 (number of Shards) * 2 (Master + number of Replicas) = 898,560 KRW

* E.g., (Classic) If you use a Redis server at high availability, then the Redis server fee will be as follows: (Usage is calculated based on a 30-day month.)

• Redis server specifications: Standard (6 GB memory)
• Total usable memory: 6 GB
• DB server fee: 206 KRW (per hour) * 24 (1 day) * 30 days (1 month) * 2 (high availability on 2 units) = 296,640 KRW

Backup Storage

• The entire data of the Redis server is backed up automatically once a day.
• The backup period is at latest one day and up to seven days, and the backup is charged at an hourly rate for the storage usage of the backup storage period.

Network transfer fee

• Network usage fee for outbound traffic is charged according to the pricing table.
• The pricing table according to network usage can be viewed from Pricing > Pricing plan by region > (Region) > Network.

• The number of key calls is not carried forward to the following month.

Pricing Examples

Case 1) If Key 1 is owned from Sept 1-5 and Key 2 is owned from Sept 1-20,
→ KRW 83 = 5 days / 30 days x KRW 1000 + 20 days /30 days x KRW 1000

Case 2) If Key 1 is called 15,000 times and Key 2 is called 10,000 times in the same month,
→ KRW 30 = Rounded up to the nearest 10,000 on the calculation (15,000 calls on Key 1 + 10,000 calls on Key 2 - 20,000 Free Calls) to result in 5,000 Calls / 10,000 X KRW 30

Pricing will be implemented based on Korea Standard Time (UTC+9).

• Number of active users: The number of different accounts (customer accounts or subaccounts) which accessed through the console or Git client for the repository created in SourceCommit.
• Storage capacity usage fee (monthly fee per GB) will be calculated as a daily unit once the free capacity is exceeded.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Pricing Examples

Case 1) If accounts (customer accounts or subaccounts) A, B, and C have accessed repository 1 for a month, and have accounts (customer accounts or subaccounts) D, E, F, and G have accessed repository 2 in same month,
→ As a total of 7 different accounts (customer accounts or Subaccounts) are counted as having accessed for one month, it will be calculated as in (Active User 7 people – 5 free offers) x KRW 1,000, and KRW 2,000 will be are charged.

Case 2) In the case that the total storage usage is 45GB by deleting one repository on 7/20 after using 50GB until 7/10 and using an additional 1GB from 7/11 to 7/20,
→ KRW 19 will be charged by calculating it as 10 days (7/11~7/20)/31 Days x KRW 60 x 1GB.

A cost-effective service that is paid as much as you use from the start to the end of SourceBuild code.

In SourcePipeline, fees are charged on the activated pipeline projects.

• Usage time will be rounded up to the nearest 15 second unit.
• Maximum speech recognition per 1 API call is 60 seconds.
• The time from the speech recognition request until termination is measured and calculated into the usage time. In other words, even if there is a period of non-usage in the middle, such as silent intervals in the middle of a file or in the middle of a streaming request for recognition, that time is included in the usage time.
• The same rate will apply on the mobile SDK and REST API.

Pricing Examples

Case 1) Using 10 seconds from API call 1: KRW 4
Case 2) Using 32 seconds from API call 1: KRW 12
Case 3) In case of using CSR for 65 seconds: Up to the time limit of 60 seconds is recognized and KRW 16 will be charged.

Ncloud Kubernetes Service Price

Provides a time-based plan to keep the container flexible depending on the situation from when the cluster starts to when it ends.

• The Worker Node in the cluster can use the server on an hourly basis.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Hourly rates are charged depending on the product rate.

Usage Fee

• All products are provided with a free trial environment of maximum 50 DAU for the first usage.
• For normal service usage, please access the dashboard after creating a project and convert it to paid service.
• For more details on how to convert to paid service, please refer to the. [User Guide].
• If you use related linked services of NAVER CLOUD PLATFORM, you may incur additional costs for using such products.
• 50,000 DAU is included by default.
• For bundle discounts based on the creation of multiple projects, consult Sales by [Contact Us].
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Search Engine Service and server instance pricing

• It can consist of two managers, three or five masters, and three or more data nodes for cluster configuration, and a total of four servers can be composed of one manager node and three data nodes for minimal configuration purposes.
• The built-in 50GB disk is for the installation of the operating system and software and cannot be expanded or added separately. It is included in the price.
• Data storage for storing data is billed separately on a hourly basis.
• Network fees are billed in the same way as Server billing.

• Pricing will be implemented based on Korea Standard Time (UTC+9).

Data storage

• It is a storage for storing Search Engine Service data. It stores original documents, indexes, log data, etc.
• Can be used in 10GB unit from minimum 100GB to maximum 2000GB.
• The pricing table according to data storage usage can be viewed from Pricing > Pricing plan by region > (Region) > Block Storage.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Network fee

• Network usage fees for outbound traffic is billed according to the following pricing table.
• The pricing table according to network usage can be viewed from Pricing > Pricing plan by region > (Region) > Network.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

- Fees are charged based on the usage of each item, and there is no minimum fee.
- The number of messages is calculated by the number of messages sent and received between the device and Cloud IoT Core.
- The status information saved by Device Mirror is calculated in units of KB. If a status information has a size of 1.5 KB, then the execution count for Device Mirror is calculated as 2.
- Messaging fee is incurred when calling MQTT messages and APIs to run Device Mirror.

The service fee for Pinpoint Cloud is calculated based on the number of spans that are collected to trace the transactions in the distributed system, as well as any event notifications sent via SMS or email if this is enabled in the monitoring setting.

* A span is the basic unit for tracing an RPC (Remote Procedure Call). It contains data from the processing task performed upon receipt of the RPC.
The user can set the RPC call sampling rate to only collect part of RPC calls.
For example, setting the sampling rate at 10 will only collect information from 1 out of every 10 RPC calls. This will increase the span count by 1.
* Any collected data will be retained for 30 days. After data is retained for 30 days, it will be deleted without notification.

[Example] The web service was visited by 100,000 users in 1 month. Each user made 100 requests.

• Span Count = 100,000 users * 100 calls/user = 10,000,000 (The Span Count may vary, depending on service content.)
• Span Count fee = (Collected Span Count – Free Count) * 0.0055 = (10,000,000 – 100,000) * 0.0055 = KRW 54,450

VPC Peering

This is a service used when communicating between VPCs using a private IP.

• Pricing will be implemented based on Korea Standard Time (UTC+9).

Cloud Data Streaming Service and server instance pricing

• 4 servers are created in total by default (1 manager, 3 nodes) for configuring the cluster.
• The default 50 GB disk space is provided for installing OS and software and can't be additionally extended or added. The cost for this is included in the usage fee.
• The data storage for storing the data is charged separately at an hourly rate, depending on the usage amount.
• Network cost is charged the same as for servers.

Data storage

• This storage is for saving streaming data in Apache Kafka.
• You can use a capacity ranging from 100 GB to 2,000 GB, in 10 GB units.
• The pricing table according to data storage usage can be viewed from Pricing > Pricing plan by region > (Region) > Block Storage.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

Network pricing

• Outbound traffic usage is billed based on the following pricing table.
• The pricing table according to network usage can be viewed from Pricing > Pricing plan by region > (Region) > Network.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

· Free plan provides 20 minutes of free trial.

To help you use the service flexibly in different situations, we offer an hourly usage-based price plan.

※1. When you can't use the service due to server shutdown or service deactivation, it is automatically excluded from the total usage time.
※2. When the server is terminated, the service usage is automatically terminated.
※3. Pricing will be implemented based on Korea Standard Time (UTC+9).

(Fee example) If Agent runs for 10 hours on one server and 5 hours on another, the fee is as follows.
-> 1500 KRW = (10 hours x 100 KRW/hour + 5 hours x 100 KRW/hour)

Hourly rates are charged, depending on the product.

Product pricing

• In cases where other related services from the Naver Cloud Platform are used such as Papago API, additional costs may be incurred for these services
• The basic pricing plan includes 2,000 CCU.
• Pricing will be implemented based on Korea Standard Time (UTC+9).

- Pricing is calculated based on vCPU values assigned to individual nodes such as Orderer, Peer, and CA.
- Fees for Kubernetes Service and networking products such as NAT Gateway and Load Balancer while using Blockchain Service are billed separately.
- When configuring a consortium, traffic generated from different accounts will result in additional networking fees.

• Up to 2,000 characters can be requested for calling API once.
• Total calls used are calculated cumulatively on a monthly basis.

Pricing Examples

Case1) Calling 1time(800 characters), 2times(700 characters), 3times(1,000 characters): 6 KRW(billing is free for less than 1,000 times a month) 
Case2) Calling 10,000calls per month by 500 characters: 18,000KRW

• Up to 1,000 characters can be requested for calling API once.
• If there are multiple sentences within 1,000 characters, the results are returned for each sentence by internally dividing the sentences.
• Total calls used are calculated cumulatively on a monthly basis.

Pricing Examples

Case1) Calling 1time(800 characters), 2times(700 characters), 3times(1,000 characters): 3 KRW(billing is free for less than 1,000 times a month) 
Case2) Calling 10,000calls per month by 500 characters: 9,000KRW

• Ncloud Simple RabbitMQ was developed using RabbitMQ, an open source message broker software, and it provides services in conjunction with Server and LoadBalancer.
• There are no additional charges, other than the Server and LoadBalancer usage fees.

Service usage fees

• The Clara Parabricks service is installed on a GPU server for provision, and it is charged hourly according to the GPU usage time.
• The usage fees for the GPU server is charged separately.

How to use the technical support service

It is a free service

• Certificates issued from Certificate Manager are billed on a yearly basis.
• Billing period is based on KST (UTC + 09:00).
• Cloud Basic certificate is exclusively intended for use on the NAVER Cloud Platform and offered free of charge.